Ingredients: Pure natural, unadulterated coarse-grained evaporated salt without the addition of any anticaking agents and synthetic colourants.

An integral part of every dishwashing machine is an ion exchanger which traps the calcium and magnesium ions which cause hard water and feeds soft water into the machine. This is intended to prevent the development of limescale on glasses and cutlery. If the ion exchanger becomes saturated with calcium and magnesium ions, its absorptivity must be restored by means of regeneration. For this purpose, we use regenerating salt, which causes the exchange of the hardness ions and thus ensures optimal rinsing results. Application / Dosage: As soon as the dishwasher s salt needed light turns on,  fill the designated salt compartment with regenerating salt according to the machine manufacturer's instructions for use. Experience shows that some machines indicate their need for salt replenishment at a very late state. To prevent this, the regenerating salt compartment should be regularly refilled even though the display does not yet indicate the respective need. Had the salt compartment been completely emptied, wait for about 2 hours after replenishing it before switching the machine on again; this gives the ion exchanger sufficient time to regenerate. Correct setting of the ion exchanger (water softener): Adjust the built-in water softener in your dishwasher to be one hardness range higher than indicated for your actual hardness of water. Example: Your water hardness is range II (8.4 14 °dH / 15 25 °fH), then adjust to hardness range III (>14 °dH / >25 °fH). For doing so, please consult the Instructions for Use of your Dishwasher, section Water Softener (s. also Sonett Info Sheet Dishwasher Detergent, Clear Rinse, Regenerating Salt )

More From This Category